Drain lining is the most efficient and easy way of fixing blocked drains Maidstone. They can also be a quick fix for cracked and damaged drains as well that too without involving any property or land digging. Drain lining is a permanent structural solution that features an addition of a new layer inside the drains for better reinforcement.
Choosing drain relining is an effective way of protecting your drain from future damages and cracks besides prolonging its lifespan.
Is Drain Lining Suitable For All Types Of Drain Repairs?
The drain lining solutions are specially designed for all types of drainage problems including but not limited to drain damages and blocked drains Maidstone resulting from debris, foundation concrete, tree root ingress, offset joints or displaced pipes. You can also count on drain lining for collapsed and leaking sewers and difficulty to excavate and access drains.
What Are The Steps Involved In Drain Relining?
There are various steps involved in drain relining that one must know about. Here are the main steps every engineer takes when performing the drain relining procedure.
Drain Inspection And Assessment
Drain lining begins with a meticulous drain inspection by the experts. Contrary to the conventional drain replacement method which includes pipe excavation, the drain relining procedure counts on the advanced CCTV survey. The CCTV drain inspection identifies the extent and location of the drain damage.
Debris Cleaning
After drain inspection, the experts will perform a thorough cleaning of the drains to ensure it is obstruction-free. Robotic cutters are used to remove the intrusions like tree roots from steel and concrete drains. After debris cleaning, the high-pressure infused water jetter is used for debris cleaning from the pipe to ensure good adhesion on the walls of the pipes.
Re-Inspecting The Drains
Before fixing the new drain liner, the engineers inspect the pipes again to ensure the complete removal of all the intrusions.
Making The Lining Ready
The relining method along with the accurate pipelining type is required during this level, owing to the use of various liner types in various situations. To ensure manoeuvrability, curved pipes need flexible liners.
Installation
The experts can use either of the two installation procedures available for drain lining. While the first step is called inversion, the second procedure is known as GFRP UV pipelining. The first method needs the experts to pour the resin inside the drain liner and roll them repeatedly to distribute it evenly on the body. It is thereafter put inside the damaged or blocked drains Maidstone with the help of inflated airbags to help the lining achieve the pipe walls’ shape.
In the second method or GFRP UV pipelining, winches and cables are used to pill the pipelining inside the damaged pipes. Both methods ensure perfect fitting of the lining inside the pipe surface for effective drainage.
Curing
Once the installation is done, the curing procedure starts. This includes the resin hardening to make sure the lining is in its place. When experts are using inversion for installation, they can cure by themselves. Run some hot water using a pope to speed up the process. UV lighting is used by the GFRP UV pipes to achieve full hard curing.
The curing procedure is followed by the re-inspection of the experts to ensure the drain is working again. Drain lining has various benefits, and unblocked blocked drain Maidstone is the most important of them all. They also ensure a better flow rate of the drains and reduced disruptions in drainage.
